Product ID:RP 4026 RESIN
MSDS Date:06/21/1995
FSC:8030
NIIN:01-312-8634
Kit Part:Y
MSDS Number: CCMJY

CIBA-GEIGY CORP REN PLASTICS DIV

4917 DAWN AVE
EAST LANSING, MI 48823-5605
US

Emergency Phone: 517-351-5900

Info Phone: 517-351-5900 / FAX 517-351-9003

Cage: 02684

CIBA-GEIGY CORP ADDITIVES DIV.

HAWTHORNE, NY 10532-2119 US

Telephone: 800-888-8372

Cage: 07566

ALUMINUM (SARA 313)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15 MG/M3 DUST

ACGIH TLV: 10 MG/M3 DUST; 9596

BENTONITE

CAS: 1302-78-9

RTECS: CT9450000

OSHA PEL 5 MG/M3 (DUST)

ACGIH TLV: 5 MG/M3 (DUST)

PHENOL,POLYMER WITH FORMALDEHYDE,GLYCIDYL ETHER

CAS: 28064-14-4

1,4-BUTANEDIOL DIGLYCIDYL ETHER

CAS: 2425-79-8

RTECS: EJ5100000

EPOXY RESIN

CAS: 25085-99-8

LD50 LC50 Mixture:NOT GIVEN
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN CONTACT MAY PRODUCE SEVERE SKIN
IRRITATION. EYE CONTACT MAY PRODUCE CONTACT. SENSITIZATION IS
POSSIBLE IN SENSITIVE INDIVIDUALS. HEATED PRODUCT MAY PRODUCE
INHALABLE VAPORS.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:SEVERE SKIN IRRITATION, EYE IRRITATION, SKIN
BURNS, ALLERIC SKIN REACTION.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN AND EYE
CONDITIONS MAY BE AGGRAVATED BY EXPOSURE.

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING EYELIDS
OPEN. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
WASH WITH SOAP AND WATER. IF IRRITATION PERSIST, GET MEDICAL
ATTENTION. INH ALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. GET
MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING. GIVE 1-2
GLASSES OF WA TER IF CONSCIOUS. GET MEDICAL ATTENTION.

Flash Point Method:PMCC
Flash Point:>148.9C, 300.F
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:FIRE MAY PRODUCE HAZARDOUS AND/OR TOXIC
DECOMPOSITION PRODUCTS.

Spill Release Procedures:REMOVE SPILLAGE BY ABSORBING IN ABSORBENT
MATERIAL. AVOID CONTACT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DON'T GET ON SKIN OR CLOTHING. AVOID
CONTACT WITH EYES. AVOID BREATHING VAPORS OR MIST. KEEP CTAINER
CLOSED. USE W/ ADEQUATE VENTILATION.
Other Precautions:NUISANCE DUST MAY BE GENERATED WHEN SANDING OR
SAWING. CORROSIVE: CAUSES SKIN BURNS/EYE IRRITATION. MAY CAUSE
ALLERGIC SKIN ACTION.

Respiratory Protection:IF EXPOSURE MAY OR DOES EXCEED OCCUPATION
EXPOSURE LIMITS USE A NIOSH-APPROVED ORGANIC VAPOR CARTRIDGE
RESPIRATOR IN ACCORDANCE WITH 29 CFR 1910.134 TO PREVENT EXPOSURE.
Ventilation:LOCAL EXHAUST AND MECHANICAL (GENERAL) VENTILATION AS
REQUIRED TO MAINTAIN EXPOSURE LEVELS.
Protective Gloves:IMPERMEABLE
Eye Protection:SPLASH PROOF CHEMICAL GOGGLES
Other Protective Equipment:CHEMICAL RESISTANT CLOTHING AS NECESSARY TO
PREVENT SKIN CONTACT. AN EMERGENCY EYEWASH AND SHOWER SHOULD BE
AVAILABLE.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
KEY1:C4.

HCC:N1
Boiling Pt:>176.7C, 350.F
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Decomp Temp:Decomp Text:NOT GIVEN
Vapor Pres:.O1
Vapor Density:NOT GIVEN
Spec Gravity:1.50-1.55
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY THIXOTROPIC LIQUID, ODOR NOT SPECIFIED
Percent Volatiles by Volume:NEG

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS AND BASES.
Stability Condition to Avoid:EXCESSIVE HEAT FOR PROLONGED PERIODS OF
TIME.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE

Waste Disposal Methods:CONSULT QUALIFIED LOCAL OR CORPORATE PERSONNEL
FOR METHOD THAT WILL COMPLY WITH LOCAL, STATE AND FEDERAL HEALTH
AND ENVIRONMENTAL REGULATIONS. NOT A HAZARDOUS WASTE UNDER RCRA.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.